Difference between revisions of "Nouveau-Maxwell"

From QWiki
 
Line 1: Line 1:
Don't do this if you don't understand what you are doing. Without a mounted fan on the card connected to the motherboard or water-cooling your 980ti will be very very hot! Don't even bother playing around with GLSL - it's unstable and almost no difference in quake anyway :-)
+
Don't do this if you don't understand what you are doing. Without a mounted fan on the card connected to the motherboard or water-cooling your 980ti will be very very hot!  
  
 
In
 
In

Latest revision as of 20:28, 3 September 2020

Don't do this if you don't understand what you are doing. Without a mounted fan on the card connected to the motherboard or water-cooling your 980ti will be very very hot!

In

   linux/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c

At the section

   nv120_chipset = {
       .name = "GM200",

[..]

Under

       .bus = gf100_bus_new,

Add

       .clk = gk104_clk_new,

Replace

       .pmu = gm200_pmu_new,

With

       .pmu = gm107_pmu_new,

.. recompile the kernel (that's out of the scope of this document)

in /lib/modprobe.d/ or /etc/modprobe.d/ put this in the nouv.conf file:

   options nouveau config=NvClkMode=15,NvMemExec=1,NvBoost=2


Add this stuff to xorg.conf (or else.. fps drops!)

   Option "HWCursor" "on"
   Option "GLXVBlank" "off"
   Option "PageFlip" "off"
   Option "DRI" "3"